5 min read · By the AMFAC team
The short answer: A burst pipe rarely costs just a plumber. It can mean water damage, ruined inventory, lost sales and days with a location closed. Most freezes are preventable: find the pipes in cold spaces, insulate and seal them, keep the heat at 55°F or higher, and have a shutoff plan for every site.
Here’s how it usually goes. A building closes Friday evening. Saturday night, the temperature drops into the single digits. A sprinkler line above the loading dock, or a supply line on an outside wall, freezes and splits. Nobody notices until Monday morning, when someone opens the door to standing water.
The repair to the pipe is often the smallest part of the bill. The bigger costs are everything the water touched: drywall, flooring, ceiling tiles, inventory, equipment, plus the days a location can’t open. That’s why preventing frozen pipes in commercial buildings is one of the highest-value jobs a facility team does all winter.
From the field: The pipes that freeze are rarely in the middle of the building. They’re the runs nobody thinks about: a sprinkler branch in a vestibule, a supply line behind a restroom on an exterior wall, a pipe above a drop ceiling near a loading door. When you walk a building for freeze risk, walk the edges, not the middle.
Why commercial pipes freeze
Pipes freeze where cold air reaches them and heat doesn’t. In commercial buildings that usually means exterior walls, loading docks, the space above drop ceilings, vestibules, unheated storage rooms and crawl spaces. The risk climbs when buildings sit empty over weekends and holidays and thermostats get turned down to save money.
Step 1: Walk the building and find the risky runs
You can’t protect what you haven’t found. Walk each building and note every pipe that passes through an unheated or poorly heated space. Pay extra attention to older buildings, where pipes often run along exterior walls, and to sprinkler lines in attics, docks and vestibules.
Step 2: Insulate and seal
Add pipe insulation or heat tape to exposed lines in cold areas. Then go after the cold air itself: seal gaps around pipe penetrations, vents and utility openings, and replace worn weatherstripping on doors near plumbing. A small draft aimed at a pipe is often all it takes.
Step 3: Keep the heat on, even when you’re closed
Keep every space with plumbing at 55°F or warmer, including over weekends and holidays. Open cabinet doors under sinks on outside walls so warm air can reach the pipes. The extra heating cost for a long weekend is small next to the cost of a flood.
Step 4: Shut down what you don’t need
Turn off and drain exterior hose bibs and irrigation lines. Drain water lines in seasonal or vacant spaces. Label shutoff valves clearly, so whoever is on site during an emergency can find them fast.
Step 5: Know the warning signs
Low or no water flow from a faucet during a cold snap is the classic early sign. So is frost on a visible pipe, a strange smell from a drain, or a new wet spot on a ceiling or wall. If you suspect a frozen pipe, shut off the water to that line and call for help. Never use an open flame to thaw it.
Step 6: Plan for every site, not just the big one
For teams with multiple locations, the real risk is the site nobody checked. Use a standard freeze-prevention checklist everywhere, assign a contact at each location, and consider temperature or water sensors in your highest-risk buildings, so a problem on Saturday doesn’t wait until Monday.
Where the costs really come from
When a pipe bursts in a commercial building, the bill usually has several parts, and the plumbing repair is often the smallest:
- Water damage: drywall, insulation, flooring and ceiling tiles that have to be removed, dried and replaced
- Contents: inventory, furniture, electronics and records that got wet
- Downtime: lost sales, idle staff and rescheduled appointments while the space is closed
- Mold risk: wet materials that aren’t dried quickly can lead to mold, adding more cost and delay
- Insurance: deductibles, claims paperwork, and possibly higher premiums later
That’s why prevention pays for itself. A few hours of insulation and a thermostat set a little higher cost a fraction of even one of those line items.
A special case: fire sprinkler lines
Sprinkler pipes deserve extra attention because a freeze can do two kinds of damage: a flood when the pipe splits, and a fire protection system that may not work when it’s needed. Wet sprinkler lines in unheated vestibules, loading docks and attics are the most exposed. Some buildings use dry systems in cold areas, which have their own maintenance needs. Either way, work with a licensed fire protection contractor on inspections and any changes. Your job as a facility manager is to make sure heat reaches those spaces and that nothing blocks it.
If a pipe bursts: the first 30 minutes
Speed matters more than anything else. Here’s what to do, in order:
- Shut off the water, at the fixture or zone valve if you can, or at the main if you can’t find it fast
- If water is near outlets, panels or equipment, turn off power to that area and keep people away
- Call your plumber or maintenance provider, and your fire protection contractor if a sprinkler line is involved
- Move inventory, electronics and records out of the water’s path
- Take photos and video of the damage before cleanup starts, for insurance
- Start removing standing water and get air moving to begin drying
Before a holiday shutdown
Long weekends and holiday closures are when most freezes happen, because nobody is there to notice. Before you lock up:
- Confirm the heat is set to at least 55°F, and that the setting won’t be overridden by a schedule
- Open cabinet doors under sinks on exterior walls
- Check that space heaters, if used, are safe and approved, and never leave them near combustibles
- Make sure someone is assigned to check the building, or that sensors will alert you
- Leave the shutoff locations and emergency numbers posted where anyone can find them
Sensors: a small investment for big buildings
Wireless temperature and water-leak sensors are inexpensive and easy to install. Placed near your highest-risk pipes, they send an alert to your phone when a space gets too cold or water shows up where it shouldn’t. For a multi-site portfolio, that turns a Monday-morning discovery into a Saturday-night phone call, and that difference can save a location.
Get help preparing your buildings
AMFAC is a veteran-owned facility maintenance company serving businesses across New England, including Massachusetts, New Hampshire and Maine. Our commercial handyman program covers winter prep, pipe insulation, weatherstripping and on-call repairs, with one point of contact for every site. For a full seasonal list, see our winter facility maintenance checklist.
FAQ
At what temperature do pipes freeze in commercial buildings?
Pipes in unheated spaces are at risk once outdoor temperatures drop into the low 20s °F or below, especially overnight and during long cold stretches.
What temperature should a closed commercial building be kept at?
At least 55°F in any area with plumbing.
Does AMFAC provide winter prep for multiple locations?
Yes. We run the same freeze-prevention checklist across every site and report back on what was done.